Skip to main content
Home Assistant turns your DevKit into a smart home hub. Install it from Settings → DevKit in the OpenHome dashboard with no terminal, then control lights, sensors, thermostats, and thousands of other devices. You can even operate them by voice through your agent. Once installed, it starts automatically on boot, connects to OpenHome out of the box, and arrives pre-configured with your timezone and location.
Requires the Home Assistant 64-bit firmware. Your DevKit must be running the Home Assistant 64-bit firmware before you can install Home Assistant. Check and change it under Settings → DevKit, in the Firmware selector, then come back here.

​
Where to next

Manage

Install, update, and manage Home Assistant from the dashboard.

Use it

Open the dashboard and add any integration you like.

Talk to your home

Build an Ability to run your devices with spoken commands.